This content is current only at the time of printing. This document was printed on 24 June 2021. A current copy is located at http://www.plural-consulting.com/taxonomy/term/18031
You are here
I want to register a product that is based on an existing registered reference product
Applications to register a new product based on that product being similar or closely similar to a registered reference product can be made via one of the following item numbers:
Item 5—new product—similar to a reference product (efficacy and safety and chemistry and manufacture data required)
Item 6—new product—closely similar to a reference product (chemistry and manufacture data required)
Item 7—new product—closely similar to a reference product (no further data required).
Applicants can also seek approval of a new source of an existing active constituent in conjunction with a product registration under Item 5 and 6 applications. Please see 'I want to register a product and apply for the concurrent approval of a new source of active' for further information about this pathway.
If your proposed product is:
- the same as a reference product (ie only the product name and owner are changing), then you should submit your application under an Item 8 (also referred to as a 'repack')
- not similar, or closely similar to a reference product, or requires a technical assessment other than chemistry or efficacy and safety, you should submit your application under an Item 10.
This tailored guidance covers applications to register a new product on the basis that it is similar, or closely similar, to an existing registered product (referred to as a reference product). This allows the APVMA to consider the proposed new product based on the risk assessments previously conducted for the registration of the reference product.
Reference products should be agvet chemical products currently registered by the APVMA. Registered chemical products can be searched on APVMA’s product search tool. Where there are relevant limits on the use of information associated with the reference product, the APVMA will require consent from the holder of that information before it can be considered as a reference product to support your application.
Which application form do you need?
Schedule 6 of the Agvet Code Regulations provides statutory definitions of when a proposed product is similar or closely similar to a reference product. To determine the appropriate Item number, you need to first establish whether your product meets the statutory definition of similar or closely similar in relation to your nominated reference product. The following table lists the criteria to assist you through this step:
(proposed product compared to reference product)
|Same concentration of actives||N/A||Y|
|Other ingredients in the formulation are the same or perform the same function||N/A||Y|
|Formulation type is the same||Y||Y|
|Label refers to same crops, situations and pests as the reference product label||Y||Y|
|Label includes similar instructions for use as the reference product||Y||Y|
|Label claims are the same, fewer or reduced||Y||Y|
|Reference product information is not subject to limit of use of information or
the applicant has obtained consent from the owner to use the data from the reference product
The following table depicts for each relevant risk area where either:
i) a specific ‘assessment’ will apply, or
ii) where the submission relies on the ‘reference product’.
|Risk area by module type||Item 5||Item 6||Item 7|
|2: Chemistry||Assessment||Assessment||Reference product|
|3: Toxicology||Reference product|
|4: Toxicology – poison scheduling||Reference product|
|5: Residues and trade||Reference product|
|6: Work health and safety||Reference product|
|7: Environment||Reference product|
|8: Efficacy and safety||Assessment||Reference product|
|9: Non-food trade||Reference product|
|10: Special data||Reference product|
Reference product = risk assessment can be satisfied by that previously undertaken on a single reference product.
Pre-application assistance is available to give applicants advice on the requirements of an application before submission.
Specific information on completing this application form is provided below. Once you are familiar with the content you can proceed to ‘Start an application’ at the button below.
The Agricultural and Veterinary Chemicals (Administration) Act establishes the APVMA as an independent statutory authority of the Commonwealth, responsible for the regulation and control of agvet chemicals in Australia up to the point of retail sale. This Act contains all of the internal details of the establishment of and the functions and powers of the APVMA. It also contains provisions controlling the import and export of chemicals.
The Agricultural and Veterinary Chemicals Act contains the constitutional and other legal provisions that enable the Agvet Code to have effect.
The Agricultural and Veterinary Chemicals Code Act, among other things, contains the detailed provisions allowing the APVMA to evaluate, approve or register and review active constituents and agricultural and veterinary chemical products (and their associated labels); and to issue permits and to license the manufacture of chemical products. It also contains provisions for controls to regulate the supply of chemical products; and provisions ensuring compliance with, and for the enforcement of, the code.
The Agricultural and Veterinary Chemicals Code Regulations 1995 prescribe detailed provisions of the Agvet Code.
The Agricultural and Veterinary Chemicals Code (Application Requirements) Instrument 2014 sets out the information that must be contained in, or accompany an, application under the Agvet Code.
Section 6A of the Agricultural and Veterinary Chemicals Code Act states that the APVMA may make guidelines. The APVMA has a number of guidelines which fall under this, for example:
In addressing the criteria, the applicant may provide information, or valid scientific argument that might address a specific criterion. The following sections of the Agvet Code provide definitions for meeting the criteria:
- Safety (Section 5A).
An active constituent or chemical product meets the safety criteria if use of the constituent or product, in accordance with any instructions approved, or to be approved, by the APVMA for the constituent or product or contained in an established standard:
a) is not, or would not be, an undue hazard to the safety of people exposed to it during its handling or people using anything containing its residues; and
b) is not, or would not be, likely to have an effect that is harmful to human beings; and
c) is not, or would not be, likely to have an unintended effect that is harmful to animals, plants or things or to the environment.
To satisfy the S 5A criteria, the APVMA considers chemistry and manufacture, toxicology (including poison scheduling, residues, work health and safety, environment and target safety).
- Efficacy (Section 5B)
A chemical product meets the efficacy criteria if use of the product, in accordance with instructions approved, or to be approved, by the APVMA for the product or contained in an established standard, is, or would be, effective according to criteria determined by the APVMA by legislative instrument.
- Trade (Section 5C)
A chemical product meets the trade criteria if use of the product, in accordance with instructions approved, or to be approved, by the APVMA or contained in an established standard, does not, or would not, unduly prejudice trade or commerce between Australia and places outside Australia.
- Labelling (Section 5D)
In approving a label for a container for chemical products, the APVMA must be satisfied that the label contains adequate instructions. This allows the APVMA to ensure that the risks of using the agvet chemical product are adequately mitigated through appropriate instructions.
The APVMA’s Agricultural Labelling Code and Veterinary Labelling Code also contain further labelling requirements that ensure a standard layout, eligibility and further help in mitigating the risk of using agvet chemical products when used in accordance with the label instructions.
Section 8A of the Agvet Code provides the definition of 'meets the application requirements'.
Parts 2 and 4 of the Agricultural and Veterinary Chemicals Code (Application Requirements) Instrument sets out the information that must be contained in, or accompany an, application under the Agvet Code.
6A of the Agvet Code states that the APVMA may make written guidelines for performing its functions and exercising its powers under this Code.
The APVMA has designed guidelines to help inform the APVMA and applicants as to the modules, data and information that will apply for different types of applications. The guidelines are not the law. The APVMA will have regard to it, but from time to time may depart from it when determining the modules, data and information are necessary for a particular application. The APVMA has a number of guidelines which fall under this, for example:
Applications may be withdrawn
Section 8D of the Agvet Code states that at any time after the application is made and before it is determined, the applicant may withdraw it by giving the APVMA written notice of the withdrawal signed by the applicant.
The following definition of closely similar?is?as contained in Schedule 6 of the Agricultural and Veterinary Chemicals Code Regulations 1995.
1.2? When chemical products are closely similar
? ? ? ? ? ? ?(1)? Subject to subsection (2), an agricultural chemical product (the proposed chemical product) and a reference chemical product are closely similar if:
???????????????????? (a)? the active constituents in the proposed chemical product are the same as the approved active constituents in the reference chemical product; and
???????????????????? (b)? the concentration of the active constituents referred to in paragraph (a) are the same; and
???????????????????? (c)? either:
????????????????????????????? (i)? the other ingredients in the formulations of the proposed and reference chemical products are the same; or
? ? ? ? ? ? ? ? ? ? ? ? ? ? ? (ii) if the other ingredients in the formulations of the proposed and reference chemical products are different, those other ingredients perform similar functions (for example, as emulsifiers, surfactants, dyes or solvents); and
???????????????????? (d)? the formulation type of the proposed and reference chemical products are the same; and
???????????????????? (e)? the label of the proposed chemical product refers to the same crops, situations and pests as the approved label of the reference chemical product (that is, the proposed chemical product must have no uses additional to those of the reference chemical product); and
????????????????????? (f)? the label of the proposed chemical product includes similar instructions on how to use the product, and precautionary or safety instructions, as the approved label of the reference chemical product; and
???????????????????? (g)? either:
????????????????????????????? (i)? the claims on the labels of the proposed and reference chemical products are the same; or
? ? ? ? ? ? ? ? ? ? ? ? ? ? ? (ii) if the claims are different, the claims on the label of the proposed chemical product are fewer or reduced compared to the claims on the approved label of the reference chemical product.
? ? ? ? ? ? ?(2)? However, the proposed agricultural chemical product and the reference chemical product are taken not to be closely similar if information about the reference chemical product is protected information.
Timeframe and fees
Timeframe and fees
The fee to register a new product that is closely similar to a registered reference product and no further data is required (Item 7) is a fixed fee of $2632. The timeframe is three months. Legislative timeframes commence once the application has passed preliminary assessment and fees have been paid.
This application type is subject to an extended assessment period if a section 159 notice is sent requesting additional information. The extended assessment period for an Item 7 application is five months.
What you need to provide
To meet the application requirements you will need to provide:
- a completed online application form
- the application fee plus any amount that is due to the APVMA
- APVMA product number for your nominated reference product
- an information list
- consent for use, if your reference product has limits on use?of information
Completed online application form
First time applicants will need to complete an online services new user access form to access APVMA online services.
If you are unfamiliar with the application process you may wish to consult the guide to completing an online application.
The application fee
You may choose to:
- pay the total fee on submission?or
- pay the preliminary assessment fee of $902 on submission and the remaining balance once the application has been accepted.
You can choose to pay by credit card, electronic funds transfer or BPAY.
Note: To meet the application requirements you must pay any amount (including an amount in respect of a tax or penalty) that is due and payable by you to the APVMA (including under a law of another jurisdiction or the agvet law).
Reference product details
Applicants must nominate one, and only one, registered reference product. Details to provide include the product/active constituent number and the full name of the product/active. Reference products must be agvet chemical products currently registered by the APVMA. Registered chemical products can be searched on APVMA’s product search database.
Consent for use from the relevant authorising party (if applicable)
Consent for use is required where there is protected information listed for the reference product, unless one of the following exceptions apply:
- the applicant is the authorising party for the data associated with the reference product
- the applicant has obtained consent for use from the relevant authorising party or parties. This consent for use must be explicit and include the relevant data numbers
- the protected information is not relevant to the proposed use pattern.
Protected data details are listed in our product search database record for the reference product.
Note: Consent for use applies to all relevant risk areas
It is an application requirement that all applications for approval, registration or variation include a short description of each item of information contained in, or accompanying the application—an information list.
Any document (information) submitted with the application constitutes information for the purposes of the information list. This includes supporting information, such as consent for use letters, manufacturer's declarations, MSDS, certificates of analysis, GMP certificates and other such documentation, in addition to the scientific studies or data that may be submitted to specifically address the safety, trade and efficacy criteria.
The online application form contains fields to assist applicants in entering the information required to generate the information list.
Note: Information lists are published, including details of the holders of the information.?Applicants should take care not to inadvertently divulge confidential commercial information (CCI) when creating the list.
Electronic label (e-label)
The APVMA must have regard to certain matters or details in order to satisfy itself that a label meets the labelling criteria and approve the label (sections 5D and 14 of the Agvet Code). Applicants must use the e-label template to submit the label details that the APVMA must take into account.
Introduction to preparing a label and the label approval process provides more detailed information.
Scenario 1: Registration of a new product that is closely similar to a reference product and requires no further data
An applicant has applied to register a 100 g/L EC herbicide spray product for the control of certain grass weeds in broadleaf crops referencing a registered 100 g/L EC herbicide. The use pattern (crops and weeds) and the rate of the active is to be applied at the same as that of the reference product. The applicant has checked the APVMA product search database and confirmed that the reference product does not have any protected data.
The applicant has considered the definition of closely similar and has determined that their proposed product meets the definition in relation to the nominated reference product. The applicant does not submit any further data for assessment.
The APVMA will conduct assessments to determine if the application meets the definition of closely similar when compared to the nominated reference product to confirm that no further technical assessment of the new product is required as all safety criteria, including chemistry, have been satisfied by the reference product.
Timeframe and fees?
The assessment fee for this application is a fixed fee of $2632. The statutory timeframe will be three months but may be extended to five months if further information is required by the APVMA during assessment.
Scenario 2: Registration of a product which is submitted as closely similar but is determined in assessment not to meet the statutory definition of closely similar
An applicant has applied to register a 200 g/L insecticide spray product referencing a registered 200 g/L insecticide. The use pattern (crops and weeds) and the rate of the active is to be applied at the same as that of the reference product. The applicant has checked the APVMA product search database and confirmed that the reference product does not have any protected data.
On examination the APVMA determines that there are significant differences in the non-active ingredients between the proposed and reference product. In particular that the non-active ingredients of the proposed product do not perform similar functions as the reference products non-active ingredients.
The APVMA determines that the proposed product is not closely similar and proposes to refuse the application as they cannot be satisfied of all s 5A and s 5B criteria.
Scenario 3: Registration of a product that is closely similar but the reference product has limits on use
An applicant has applied to register a 225 g/L SC insecticide using a 225 g/L SC insecticide as the reference product. The use pattern (crop and weeds) and the rate of the active is to be applied at the same as that of the reference product for use on wheat.
The applicant has considered the definition of closely similar and has determined that their proposed product meets the definition in relation to the nominated reference product. The applicant does not submit any further data for assessment. The application has been submitted under Item 7 and a reference product has been nominated to address the risk areas.
On examination the APVMA notes that the reference product has limits on use of information applying to efficacy, target safety and residues for certain crops (apples and wheat) but not others (oranges) listed in our product search database record for the reference product. The proposed use for wheat does not meet the requirements of an Item 7 application as the reference product has relevant protected information. See the criteria matrix in the introduction section for further information. The applicant has not provided consent for use from the holder of the limits of use data relevant to wheat.
Revised application type
The applicant should instead either:
- provide consent from the holder of the protected data on wheat when submitting under an Item 7
- submit the application as a modular assessment—new product (Item 10) as the new product requires technical assessment of efficacy, target safety and residues.
Start an application
To register a new product which contains a combination of existing actives in registered products (Item 7):
You will be redirected to online services to log in.